DEVELOPMENT OF AMORPHOUS METALLIC SURFACES FOR APPLICATION IN ENERGY STORAGE SYSTEMS

Authors

  • M. V. Panchuk Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., Ivano-Frankivsk, 76019
  • L. I. Kryshtopa Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., Ivano-Frankivsk, 76019
  • R. O. Deineha Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., Ivano-Frankivsk, 76019
  • U. M. Nykolyn Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska St., Ivano-Frankivsk, 76019
  • T. M. Panchuk King Danylo University 35 Yevhena Konovaltsia Str., Ivano-Frankivsk, Ukraine

DOI:

https://doi.org/10.31471/1993-9868-2026-2(46)-238-251

Keywords:

amorphous metals, short-range order, medium-range order, metallic glasses, ion transport, electrochemical surfaces.

Abstract

Electrochemical energy storage systems, including batteries, fuel cells and supercapacitors, are crucial in addressing the imbalance between energy production and consumption. However, these systems also have several drawbacks, including high cost, limited lifespan, capacity loss, environmental risks and low energy density. A key challenge in improving energy storage systems is to investigate how advanced materials could overcome the limitations and shortcomings of modern energy systems. Amorphous metals, with their disordered atomic structure and unique interfacial properties, have emerged as a promising class of functional materials for energy storage and conversion. This study examines the impact of structural disorder — the ratio of short-range to medium-range order — on key properties such as electronic structure, ion transport, catalytic activity and mechanical ductility. It was found that adjusting the distribution of densely packed regions in amorphous materials increases plastic deformation by 2–8%, promoting a more uniform distribution of shear stress. The scientific novelty of the results lies in the comparative analysis of the functional characteristics of different material classes, which revealed that amorphous structures exhibit higher electrochemical activity, stability and energy storage efficiency than their crystalline counterparts. Additionally, the advantages of the material's local architecture in energy applications have been substantiated, with evidence showing that atomic-scale heterogeneity directly governs diffusion processes and reaction kinetics. Examples from the energy sector show that the functional performance of amorphous metals depends not only on their composition, but also on the distribution, connectivity and evolution of local atomic structures. The unique performance of amorphous metallic materials arises from the interaction between structural disorder, a tailored chemical environment, and interface-dominated processes, which together govern ion transport, catalytic activity, and mechanical stability. Thus, it can be argued that amorphous metal surfaces have become a universal platform for enhancing performance across a wide range of energy conversion and storage technologies.

Downloads

Download data is not yet available.

References

1. Panchuk, A. M., Boichuk, V. M., Prysiatniuk, P. M., Panchuk, M. V., & Sheketa, V. I. (2025). Udoskonalennia metodiv doslidzhennia elementnoho skladu biopaliv ta syrovyny dlia yikh vyrobnytstva [Improvement of methods for studying the elemental composition of biofuels and raw materials for their production]. Naftohazova Enerhetyka, (2(44)), 249–260. https://doi.org/10.31471/1993-9868-2025-2(44)-249-260 (in Ukrainian)

2. Panchuk, A., Panchuk, M., & Deineha, R. (2024). Perspektyvy vprovadzhennia tekhnolohii pirolizu biomasy dlia zbilshennia vyrobnytstva biopaliv [Prospects for the implementation of biomass pyrolysis technologies to increase biofuel production]. Naftohazova Enerhetyka, (2(42)), 137–144. https://doi.org/10.31471/1993-9868-2024-2(42)-137-145 (in Ukrainian)

3. Panchuk, M., Szkodo, M., Shlapak, M., Sheketa, V., Prysyazhnyk, P., & Stanislawska, A. (2024). Manufacturing techniques of elastomeric nanocellulose composites. In Elastomeric Nanocellulose Composites (pp. 117–140). Elsevier. https://doi.org/10.1016/B978-0-443-18608-0.00024-3

4. Mahmoud, M., Ramadan, M., Olabi, A. G., Pullen, K., & Naher, S. (2020). A review of mechanical energy storage systems combined with wind and solar applications. Energy Conversion and Management, 210, Article 112670. https://doi.org/10.1016/j.enconman.2020.112670

5. Rekioua, D. (2023). Energy storage systems for photovoltaic and wind systems: A review. Energies, 16(9), Article 3893. https://doi.org/10.3390/en16093893

6. Panchuk, M., Panchuk, A., & Mandryk, I. (2021). Problems of CO2 emissions in Ukraine and ways to overcome them. Paper presented at the Third International Sustainability and Resilience Conference: Climate Change, Sakheer, Bahrain. https://doi.org/10.1109/IEEECONF53624.2021.9668043

7. Ji, W., Hong, F., Zhao, Y., Liang, L., Du, H., Hao, J., Fang, F., & Liu, J. (2024). Applications of flywheel energy storage system on load frequency regulation combined with various power generations: A review. Renewable Energy, 223, Article 119975. https://doi.org/10.1016/j.renene.2024.119975

8. Malik, F. H., Hussain, G. A., Alsmadi, Y. M., Haider, Z. M., Mansoor, W., & Lehtonen, M. (2025). Integrating energy storage technologies with renewable energy sources: A pathway toward sustainable power grids. Sustainability, 17(9), Article 4097. https://doi.org/10.3390/su17094097

9. Aneke, M., & Wang, M. (2016). Energy storage technologies and real life applications – A state of the art review. Applied Energy, 179, 350–377. https://doi.org/10.1016/j.apenergy.2016.06.097

10. Vasishtha, A. (2025). Advanced materials for energy conversion and storage. Paper presented at the 7th International Conference on Inventive Material Science and Applications (ICIMA), Namakkal, India. https://doi.org/10.1109/ICIMA64861.2025.11074121

11. Treacy, M. M. J., & Borisenko, K. B. (2012). The local structure of amorphous silicon. Science, 335(6071), 950–953. https://doi.org/10.1126/science.1214780

12. Janovszky, D., Sveda, M., Sycheva, A., Kristaly, F., Zámborszky, F., Koziel, T., Bala, P., Czel, G., & Kaptay, G. (2022). Amorphous alloys and differential scanning calorimetry (DSC). Journal of Thermal Analysis and Calorimetry, 147, 7141–7157. https://doi.org/10.1007/s10973-021-11054-0

13. Mir, R. A., Kirk, D. W., & Thorpe, S. J. (2024). Recent progress and advances in nickel-based amorphous metal alloys towards alkaline water splitting: A review. Journal of Alloys and Compounds, 976, Article 173211. https://doi.org/10.1016/j.jallcom.2023.173211

14. Sotelo-Mazón, O., Henao, J., Zezatti, V., Rojas, H., Espinosa-Arbeláez, D., Mondragón-Rodríguez, G. C., & Poblano-Salas, C. A. (2026). Development of amorphous metallic surfaces for energy storage applications. Applied Sciences, 16(8), Article 4039. https://doi.org/10.3390/app16084039

15. Yao, Y., Rui, X., Bai, R., Ouyang, Y., Li, G., Zhao, Y., Zhu, Y., Zhao, M., Li, B. Q., Zhang, X., & et al. (2025). Roadmap for next-generation electrochemical energy storage technologies: Secondary batteries and supercapacitors. ACS Nano, 19, 30568–30687. https://doi.org/10.1021/acsnano.4c10091

16. Feng, Z., Geng, H., Zhuang, Y., & Li, P. (2024). Progress, applications, and challenges of amorphous alloys: A critical review. Inorganics, 12(9), Article 232. https://doi.org/10.3390/inorganics12090232

17. Wang, G., Chen, Z., Zhu, J., Xie, J., Wei, W., Yan, Y. M., & Ni, B. J. (2026). High-entropy amorphous catalysts for water electrolysis: A new frontier. Nano-Micro Letters, 18, Article 77. https://doi.org/10.1007/s40820-025-01936-5

18. Hwang, S., Koh, H., & Yang, J. C. (2026). Electron microscopy approaches to unraveling the structure of amorphous materials. Small Methods, 10, Article e01852. https://doi.org/10.1002/smtd.202501852

19. Aldayyat, A., & Yam, F. K. (2025). Recent development in metal phosphate-based electrode materials for supercapacitor application: A review. Journal of Solid State Electrochemistry, 29, 4249–4280. https://doi.org/10.1007/s10008-025-06280-7

20. Ning, S. R., Gao, J., & Wang, Y. G. (2011). Review on applications of low loss amorphous metals in motors. Advanced Materials Research, 129–131, 1366–1371. https://doi.org/10.4028/www.scientific.net/AMR.129-131.1366

21. Ma, D., Stoica, A., & Wang, X.-L. (2009). Power-law scaling and fractal nature of medium-range order in metallic glasses. Nature Materials, 8, 30–34. https://doi.org/10.1038/nmat2340

22. Jiang, H., Shang, T., Xian, H., Sun, B., Zhang, Q., Yu, Q., Bai, H., Gu, L., & Wang, W. (2021). Structures and functional properties of amorphous alloys. Small Structures, 2, Article 2000057. https://doi.org/10.1002/sstr.202000057

23. Sheng, H. W., Luo, W. K., Alamgir, F. M., Bai, J. M., & Ma, E. (2006). Atomic packing and short-to-medium-range order in metallic glasses. Nature, 439, 419–425. https://doi.org/10.1038/nature04421

24. Yuan, Y., Kim, D. S., Zhou, J., Chang, D. J., Zhu, F., Nagaoka, Y., Yang, Y., Pham, M., Osher, S., Chen, O., & et al. (2022). Three-dimensional atomic packing in amorphous solids with liquid-like structure. Nature Materials, 21, 95–102. https://doi.org/10.1038/s41563-021-01123-x

25. Riechers, B., Pekin, T. C., Luo, X. Y., Sun, Y., Koch, C. T., Derlet, P. M., & Maaß, R. (2026). Spatial distribution and connectivity of medium-range order signatures in a metallic glass probed with simulated and experimental 4D-STEM. Journal of Alloys and Compounds, 1058, Article 186631. https://doi.org/10.1016/j.jallcom.2026.186631

26. Rashidi, R., Vaerst, Ø., Riechers, B., Rösner, H., Wilde, G., & Maaß, R. (2026). Atomic-scale strain fluctuations as an origin for elastic microstructures in metallic glasses. Acta Materialia, 308, Article 121982. https://doi.org/10.1016/j.actamat.2026.121982

27. Wu, Y., Cao, D., Yao, Y., Zhang, G., Wang, J., Liu, L., Li, F., Fan, H., Liu, X., Wang, H., & et al. (2021). Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing. Nature Communications, 12, Article 6582. https://doi.org/10.1038/s41467-021-26880-2

28. Shi, H., Xu, Y., Liang, G., Zhan, J., Chen, J., & Guo, X. (2025). Enhancing mechanical properties and corrosion resistance of Zr-based bulk metallic glasses by Ta addition. Journal of Non-Crystalline Solids, 650, Article 123370. https://doi.org/10.1016/j.jnoncrysol.2024.123370

29. Li, L., Qian, Y., Wang, Z., Tong, Q., Wang, M., Pan, Q., & Yu, Y. (2025). Research progress on the corrosion behavior of metallic glass and its composites. Metals, 15(12), Article 1345. https://doi.org/10.3390/met15121345

30. da Costa, E. V., da Silva, M. L., de Carvalho, M. P., da Cruz, D. M., Aliaga, L. C., & Bastos, I. N. (2024). Electrochemical characterization of amorphous and crystalline Ni62Nb38 and Ni59.24Nb37.76B3.00 alloys. VETOR - Revista de Ciências Exatas e Engenharias, 34(1). https://doi.org/10.14295/vetor.v34i1.17711

31. Yang, S., Jiao, F., & Gong, Y. (2023). Electrochemical crystalline/amorphous Ni(OH)S@CoFe-LDH/NF for efficient oxygen evolution reaction. SSRN. https://doi.org/10.2139/ssrn.4591388

32. Dekhtyarenko, V. A., Nosenko, V. K., Kyrylchuk, V. V., Nosenko, A. V., Semyrga, O. M., Yevlash, I. K., & Bondarchuk, V. I. (2025). Amorphous alloys as a promising class of functional materials. Pt. 1: Manufacturing methods, structure, physical and mechanical properties. Progress in Physics of Metals, 26(3), 598–625. (in Ukrainian)

33. Das, A., Balakrishnan, N. T., Sreeram, P., Fatima, M. J., Joyner, J. D., Thakur, V. K., Pullanchiyodan, A., Ahh, J. H., & Raghavan, P. (2024). Prospects for magnesium ion batteries: A comprehensive materials review. Coordination Chemistry Reviews, 502, Article 215593. https://doi.org/10.1016/j.ccr.2023.215593

34. Guo, T., Hu, P., Li, L., Wang, Z., & Guo, L. (2023). Amorphous materials emerging as prospective electrodes for electrochemical energy storage and conversion. Chem, 9(5), 1080–1093. https://doi.org/10.1016/j.chempr.2023.03.032

35. Tian, F., Radin, M. D., & Siegel, D. J. (2014). Enhanced charge transport in amorphous Li2O2. Chemistry of Materials, 26(9), 2952–2959. https://doi.org/10.1021/cm5007372

36. Huang, Y. W., He, Y., Sheng, H., Lu, X., Dong, H. N., Samanta, S., Dong, H. L., Li, X. F., Kim, D. Y., Mao, H. K., & et al. (2019). Li-ion battery material under high pressure: Amorphization and enhanced conductivity of Li4Ti5O12. National Science Review, 6(2), 239–246. https://doi.org/10.1093/nsr/nwy122

37. Delmer, O., Balaya, P., Kienle, L., & Maier, J. (2008). Enhanced potential of amorphous electrode materials: Case study of RuO2. Advanced Materials, 20(3), 501–505. https://doi.org/10.1002/adma.200701349

38. Song, X., Bai, L., Wang, C., Wang, D., Xu, K., Dong, J., & Yang, J. (2023). Synergistic cooperation of Zn (002) texture and amorphous zinc phosphate for dendrite-free Zn anodes. ACS Nano, 17(15), 15113–15124. https://doi.org/10.1021/acsnano.3c04343

39. Liu, T., Li, N., Wu, B., Han, X., Ding, Q., Zhao, Q., Cheng, Q., Wang, R., & Li, D. (2025). Electroless deposition of Ni-Co-B-P coating as a durable electrode for hydrogen evolution reaction in alkaline media. International Journal of Hydrogen Energy, 102, 900–908. https://doi.org/10.1016/j.ijhydene.2025.01.095

40. Wang, L., Huang, K., Zheng, X., Liu, Y., Wu, J., Dai, Q., & Hou, Y. (2025). A corrosion-resistant amorphous/crystalline heterostructured catalyst for industrial-level seawater electrolysis in membrane electrode assembly electrolyzer. Advanced Functional Materials, 35, Article 2417603. https://doi.org/10.1002/adfm.202417603

41. Aneeshkumar, K. S., Tian, J., & Shen, J. (2021). Dual-phase amorphous–nanocrystalline nanoporous sites activated in Mo inserted CuTi metallic glass as efficient electrocatalysts for hydrogen evolution reaction. Journal of Alloys and Compounds, 886, Article 161270. https://doi.org/10.1016/j.jallcom.2021.161270

42. Qin, C., Zheng, D., Hu, Q., Zhang, X., Wang, Z., Li, Y., Zhu, J., Ou, J. Z., Yang, C., & Wang, Y. (2020). Flexible integrated metallic glass-based sandwich electrodes for high-performance wearable all-solid-state supercapacitors. Applied Materials Today, 19, Article 100539. https://doi.org/10.1016/j.apmt.2019.100539

43. Zheng, D., Lai, Y., Wang, M., Gong, C., Li, Q., Xie, H., Bai, Q., & Zhang, C. (2025). Robust nanoporous copper-nickel@copper-nickel oxides/metallic glass sandwiches enabling highly flexible supercapacitors. Applied Surface Science, 696, Article 162995. https://doi.org/10.1016/j.apsusc.2025.162995

44. Yuan, X. J., Zhang, Y. R., Qu, X. H., Yin, H. Q., Li, S., Yan, Z. W., Tan, Z. J., Hu, S. M., Gao, Y. G., & Guo, P. Y. (2024). A review of the preparation and prospects of amorphous alloys by mechanical alloying. Journal of Materials Research and Technology, 33, 3117–3143. https://doi.org/10.1016/j.jmrt.2024.10.026

Downloads

Published

13.11.2026

How to Cite

Panchuk, M. V., Kryshtopa, L. I., Deineha, R. O., Nykolyn, U. M., & Panchuk, T. M. (2026). DEVELOPMENT OF AMORPHOUS METALLIC SURFACES FOR APPLICATION IN ENERGY STORAGE SYSTEMS. Oil and Gas Power Engineering, (2(46), 238–251. https://doi.org/10.31471/1993-9868-2026-2(46)-238-251

Issue

No. 2(46) (2026): Oil and Gas Power Engineering

Section

NEW SOLUTIONS IN MODERN EQUIPMENT AND TECHNOLOGIES

License

Copyright (c) 2026 Oil and Gas Power Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)

Similar Articles

1 2 3 4 5 > >> 

You may also start an advanced similarity search for this article.